Products Description
The powered anode for water heater is made of titanium substrate and coated with mixed metal oxide.It is a long-term solution to preventing sulfide smells (that rotten egg smell) produced by well water. This non-consumable powered titanium anode rod provide a controlled release of electrons that negatively charge the water heater or water tank and its components, preventing corrosion (rusting) from occurring.
Working principle: Mixed metal oxide anode as an auxiliary anode (mmo titanium anode) to provide cathode current to the cathode steel plate (or enamel corrosion exposed metal part), so that the steel plate (exposed metal) cathode polarization, while releasing a large number of electrons, so that the cathode and anode potential difference becomes smaller until disappeared, effectively inhibit the corrosion and dissolution process.
Water heater tank corrosion cathodic protection is currently used more magnesium anode rod. However, magnesium rods are prone to corrosion, have a short service life, and should be replaced frequently, causing inconvenience to consumers. On the market, more and more water heater manufacturers use an impressed current cathodic protection water heater corrosion prevention method, the auxiliary anode is the titanium anode wire titanium anode rod coated with precious metal oxide.
Water heater anti-corrosion cathodic protection with titanium anode wire anode rod, through the market test, the use effect is good, and in the process of operation, there is no anode decomposition products, no pollution. The mixed oxide coated titanium anode can effectively prevent the corrosion of underwater enameled carbon steel in high hardness hot water when the input voltage is very small, and can precipitate a layer of calcium on the surface of the cathode material, which enhances the protection effect. The anode has a long service life and can achieve the effect of lifetime maintenance without replacement of the water heater.
Products Size
Substrate Metal Mechanical Properties
| Grade | Tensile strength(min) | Yield strength(min) | |||
| ksi | Mpa | ksi | Mpa | Elongation (%) | |
| Gr1 | 35 | 240 | 25 | 170 | 24 |
Parameter
| Thread | G3/4 Inch |
| Diameter | 2/3mm |
| Length | 340mm or Customize |
| Size | 20-100 Gallon Tank |
| Coating Area | As your ask |
| Coating type | Ru oxide /Pt |

Products Picture






Company introduction
The company's production and business scope: titanium ruthenium series, iridium series, platinum series, lead dioxide anode and other DSA anode processing, manufacturing and sales. Manufacture and operation of electrocatalytic oxidation equipment for sewage treatment.
The company produces 150,000 square meters of DSA coated titanium anodes and 10,000 sets of electrocatalytic oxidation equipment. Products have been successfully used in the United States, Russia, Japan, Germany, India, South Korea, Taiwan and other more than 70 countries and regions in the world of aviation, aerospace, petrochemical, electric power, environmental protection, new energy electrolytic copper foil, chlor-alkali electrolysis, electroplating, hydrometallurgy and other industrial fields, has become an important part of the world titanium industry

834M
Total Freelancer
732M
Positive Review
90M
Order recieved
236M
Projects Completed
The difference between traditional anode rod and titanium anode rod

Advantages of using electronic anode rods
According to the requirements of electronic corrosion protection systems, titanium is selected as the substrate for the electronic anode rod, and the anode rod or anode wire coated with ruthenium iridium metal oxide coating is used as the electronic corrosion protection anode.
1. After adding a certain proportion of tin element, it can reduce the depth of cracking on the surface of the anode coating, improve the electrocatalytic activity and corrosion resistance of the oxide, and enhance the enhanced electrolysis life of the anode, which can reach more than 10 years, avoiding adverse user experiences caused by frequent replacement of traditional sacrificial anode rods;
2. Coatings containing ruthenium oxide produce oxidizing substances during electrolysis reactions that have a certain effect on bacteria in water. It has a certain effect on the "odor" generated by long-term use of the water tank.
3. Due to the different requirements for protection current of cathode materials in different temperature environments, constant current cannot meet the requirements, and the constant voltage control system is complex and has poor stability. The current required for electronic corrosion protection is very small, and the constant slot pressure method is used to control the simple, practical, and ability to utilize the characteristic that the electrical resistivity of water decreases with increasing temperature. When the water temperature is low, the output protection current is small, and when the water temperature is high, the output protection current is large, making the material play a good protective effect under high and low temperature conditions

Contact
Company: Baoji Dynamic Trading Co., Ltd
Country:China
Add:Baoti road,Jintai,Baoji city,Shaanxi,China
Cel/Whatsapp :+86 18309262795
Email:annie@jmyunti.com
Website:www.jm-titanium.com

Hot Tags: titanium anode rod for solar water heater, China, suppliers, manufacturers, factory, customized, wholesale, buy, price, cheap, sale, quotation, in stock, free sample, Titanium Anode For Sewage Treatment, Iridium Coating Titanium Anode, Titanium Anode For Electrolytic Copper Foil, Pt Coated Titanium Anodes, Titanium Equipment, Titanium Anode For Swimming Pool Disinfection








