The difference between white titanium wire mesh and black titanium wire mesh

1. Material commonality: Both white titanium mesh and black titanium mesh are produced from pure titanium wire, and the material grade of pure titanium wire is usually TA1, which has the advantages of high elongation, high titanium content, high mechanical strength, and easy processing.

2. Common points of the process: The processing method and machinery are completely the same - both use plain weave square hole weaving, and the raw material diameter, material, elongation, tensile strength testing method, and testing instruments are consistent. All are produced using shuttle free woven mesh machining. The processes of warp knitting, mesh leveling, and laser cutting are the same.

3. The common packaging features are the same - the inner packaging is waterproof with bubble pads, and the outer packaging is packed in plywood boxes to prevent compression and collision.

4.The only difference is the surface - the white surface has no impurities, while the black surface has a layer of brushed graphite emulsion.

4. Application: The surface of the white titanium mesh does not contain any impurities and is suitable for use in ion membrane electrolysis cell titanium mesh anodes, anodizing experiments, catalyst support nets, purified chemical liquid filtration nets, and other non contaminated solution filtration. The surface of the black titanium mesh contains a brushed graphite emulsion coating, which is suitable for use in seawater desalination titanium filters and chemical filtration. The surface coating can slow down the erosion of the titanium substrate and extend its service life.