Baoji Dynamic Trading Co., Ltd
Salt Chlorine Generator Electrolyzer

Salt Chlorine Generator Electrolyzer

Item Type: Salt Chlorine Generator Cell
Material: Titanium Plate, ABS
Chlorine Production: 50g 100g
Type:Chlorinator

Send Inquiry
  • Description
     
    Products Description
     

     

    Salt Chlorine Generator Electrolyzer is a device that generates chlorine gas from salt water by electrolysis. This device is often used in large liquid systems such as swimming pools, spas, fountains, etc. for water purification and disinfection.

    Salt Chlorine Generator Electrolyzer Principle

    The working principle of Salt Chlorine Generator Electrolyzer is based on the principle of electrolysis. When a salt water solution is introduced into the electrolyzer, the electrolysis process occurs on the electrode plates. During this process, the chloride ions (Cl-) in the salt water lose electrons at the anode to form chlorine gas (Cl2). At the same time, at the cathode, water molecules gain electrons to produce hydrogen gas and hydroxide ions (OH-).

    product-750-750
    product-750-750

    The electrolysis process is produced by the following steps
    Equipment preparation:
    Prepare the necessary equipment such as electrolytic cell, power supply, anode and cathode. The electrolytic cell is usually made of corrosion-resistant materials to adapt to the chemical environment during the electrolysis process.
    The power supply is used to provide the required current, while the anode and cathode are the positive and negative electrodes required for the electrolysis reaction.
    Solution preparation:
    Dissolve table salt in water to prepare a brine solution of a certain concentration. This concentration range is usually between 2500~4500mg/L to adapt to different application scenarios and disinfection needs.
    Chloride ions (Cl-) and sodium ions (Na+) in salt water are the main ions in the electrolysis process.
    Filling the electrolytic cell:
    Pour the prepared brine solution into the electrolytic cell.
    Place the anode and cathode, making sure that the distance between them is close enough so that the current flows between them, but at the same time avoid the anode and cathode from touching each other to prevent short circuit.
    Power on for electrolysis:
    Turn on the power supply and start the electrolysis process.
    Under the action of the applied potential, the ions in the brine solution begin to move. The cations (Na+) move toward the cathode and the anions (Cl-) move toward the anode.
    At the anode, the chloride ions (Cl-) lose electrons and are oxidized to chlorine (Cl2). This is an oxidation reaction, and the reaction formula can be expressed as: 2Cl- - 2e- → Cl2.
    At the cathode, the water molecules (H2O) gain electrons and are reduced to hydrogen and hydroxide ions (OH-). This is a reduction reaction, and the reaction formula can be expressed as: 2H2O + 2e- → H2 + 2OH-.
    Collecting products:
    The generated chlorine will be collected and used for water disinfection and purification.
    Hydrogen needs to be properly handled to ensure safety.
    Precautions:
    The liquid level of the electrolytic cell needs to be monitored during the electrolysis process to ensure that the electrolytic power supply is allowed to supply power only when the liquid level is full to prevent sparks between the electrode plates from igniting the hydrogen left in the electrolytic cell.
    Depending on the season and indoor temperature, the current and voltage of the electrolytic power supply may need to be adjusted to prevent the electrolytic cell from overheating.
    The status of the electrolyzer and equipment needs to be checked regularly to ensure that they are in good working condition.
    Through the above steps, the electrolysis process can continuously produce chlorine and other products to achieve the purpose of water purification and disinfection.

     
    Products Process
     

     

    Process of Salt Chlorine Generator Electrolyzer

    Brine preparation: Dissolve salt in water to prepare a brine solution of a certain concentration.
    Electrolysis process: The brine solution is introduced into the electrolytic cell and electrolyzed through the electrode plates to generate chlorine, hydrogen and hydroxide ions.
    Chlorine collection: The generated chlorine will be collected and used for water disinfection and purification.

    product-1200-600

     

     

     

    Salt Chlorine Generator Electrolyzer
     

    What are the factors that affect Salt Chlorine Generator Electrolyzer?

    Salt water concentration

    The concentration of chloride ions in brine is an important factor affecting the production of chlorine by electrolysis. If the concentration of chloride ions in the solution is not high enough, the electrons lost at the anode may be hydroxide rather than chloride ions, resulting in the inability to effectively produce chlorine by electrolysis, but instead producing oxygen. Normally, the concentration of brine needs to be within a certain range (such as 2500~4500mg/L) to ensure the efficiency and safety of the electrolysis process.

    product-600-600
    product-525-525

    The resistance of the electrolyzer

    The resistance of the electrolytic cell will affect the current and voltage of the electrolysis process. For example, scaling of the plates of a sodium hypochlorite generator will increase the resistance, which will in turn affect the electrolysis efficiency and current output.
    The increase in resistance will cause the current to decrease, slowing down the electrolysis process and affecting the amount of chlorine produced.

    Supply voltage and current

    The voltage and current provided by the power supply directly affect the speed and efficiency of the electrolysis process. The appropriate voltage and current can ensure the smooth progress of the electrolysis process and produce enough chlorine gas.
    Too high or too low voltage and current may affect the electrolysis effect, and even cause damage to the equipment.

    product-818-600
    product-750-750

    Ambient temperature and humidity

    The ambient temperature affects the reaction rate of the electrolysis process. Too high a temperature may accelerate the electrolysis process, but it may also cause the equipment to overheat or be damaged.
    The ambient humidity affects the insulation performance of the electrolytic cell and the diffusion rate of chlorine. Too high humidity may cause the equipment to become damp or short-circuit, affecting the electrolysis effect.

    Electrode material

    The choice of electrode material will also affect the electrolysis process. Different electrode materials have different catalytic activities and corrosion resistance, which will affect the electrolysis efficiency and the service life of the electrode.
    Choosing Gr1 electrode material can improve the efficiency and stability of the electrolysis process.

    product-750-750
    product-750-750

    Operation and maintenance

    Correct operation and maintenance are essential to ensure the stability and safety of the electrolysis process. Improper operation or maintenance may lead to equipment damage, reduced electrolysis efficiency or chlorine leakage. Therefore, it is necessary to regularly maintain and inspect the equipment to ensure that it is in good working condition.

     

     
     
    Products Application
     

     

    The main use of Salt Chlorine Generator Electrolyzer is water purification and disinfection. In places such as swimming pools, spas, fountains, etc., it can continuously generate chlorine to disinfect water bodies, prevent the growth of microorganisms such as bacteria and viruses, and ensure the hygiene and safety of water quality. Compared with traditional chlorine disinfection methods, Salt Chlorine Generator Electrolyzer has higher safety and environmental protection because it does not require the storage and use of chlorine, avoiding the risk of chlorine leakage and pollution. At the same time, it can also automatically adjust the amount of chlorine generated according to the actual situation of the water body to ensure stable and reliable water quality.

    product-750-750
    product-750-750

    How to deal with chlorine gas produced during electrolysis?

    When handling chlorine gas produced during electrolysis, a series of steps and precautions need to be followed to ensure safety and environmental protection.

    Ensure good ventilation:
    Chlorine gas is a toxic and irritating gas, so the area where chlorine gas is handled must ensure good ventilation to maintain air circulation. Use ventilation equipment or exhaust fans to help discharge chlorine gas to the outside to reduce the indoor chlorine concentration.
    Personal protection:
    Operators should wear appropriate personal protective equipment, including respiratory protection equipment (such as gas masks) and chemical safety glasses to prevent direct inhalation or contact with chlorine gas. Avoid direct skin contact with chlorine gas and wear appropriate protective clothing and gloves.
    Stop electrolysis immediately:
    Once chlorine gas is leaked or produced, the electrolysis process should be stopped immediately, and the power and gas supply should be turned off to prevent further production of chlorine gas.
    Safe discharge:
    Under safe conditions, chlorine gas should be discharged from the operating area through ventilation equipment or exhaust fans.
    Ensure that the discharge process complies with local safety and environmental regulations.
    Warning signs:
    Place warning signs around the area where chlorine gas leaks to warn other people not to approach.
    Emergency treatment:
    If you find any symptoms of physical discomfort, such as difficulty breathing, dizziness, etc., you should immediately seek medical attention and inform the doctor that you may have been exposed to chlorine. When dealing with chlorine leaks, emergency treatment equipment, such as chlorine absorbents or neutralizers, should be prepared to deal with emergencies.
    Compliance with regulations:
    When handling chlorine, local regulations and standards must be strictly followed to ensure the safety and environmental protection of the operation process.
    Training and education:
    Operators should receive relevant training and education to understand the properties, hazards and treatment methods of chlorine to improve safety awareness and response capabilities.
    Regular inspection and maintenance:
    Perform regular inspection and maintenance of electrolytic equipment and treatment systems to ensure the normal operation and safety performance of the equipment.
    Records and reports:
    Record relevant data and information on the electrolysis process and chlorine treatment, including generation, treatment methods, emissions, etc. Report relevant information to superiors or environmental protection agencies as needed.
    By following the above steps and precautions, the chlorine generated during the electrolysis process can be safely and effectively handled to ensure the safety of operators and the satisfaction of environmental protection requirements.

     
    More Electrolyer
     

     

    product-600-600
    product-525-525
    product-750-750
    product-750-750

     

     

     

     

     
     Packing & Shipping
     

     

    product-300-300

    Product packaging

    Material selection:
    Corrosion-resistant, waterproof and impact-resistant materials should be used to ensure the safety of the product during transportation. Packaging materials should meet environmental protection requirements to avoid pollution to the environment.
    Packaging design:
    Considering the size, weight and shape of the product, design a reasonable packaging structure to ensure that the product is stable and not easy to move inside the package.
    For vulnerable parts, additional protection measures should be provided, such as using foam or shock-proof pads.
    Packing process:
    Before packaging, clean and inspect the product to ensure that the product is not damaged or contaminated.
    Use appropriate packaging tools and methods, such as strapping tape, sealant, etc., to ensure the firmness and sealing of the package.

    product-750-623
    Product  Shipping

    Mode of transportation:
    Depending on the size, weight and destination of the product, choose a suitable mode of transportation, such as land, sea or air.
    Protection during transportation:
    During transportation, necessary measures should be taken to protect the product from vibration, shock and temperature changes. For parts or materials that require special handling, additional protection measures should be provided.
    Transportation tracking and insurance:
    Provide transportation tracking services so that customers can understand the transportation status of the product in real time.
    Purchase transportation insurance for the product to deal with possible unexpected situations, such as loss and damage of goods, etc.

     

     

    How To Cooperate With Us?

    Optimize production efficiency and energy consumption:
    The production electrolysis efficiency can reach 91%, indicating that it has a high working efficiency.
    High degree of automation:
    Chlorine extraction can be run automatically, reducing the need for manual operation and improving the automation level of production.
    High degree of automation:
    Chlorine extraction can be run automatically, reducing the need for manual operation and improving the automation level of production.
    High degree of automation:
    Chlorine extraction can be run automatically, reducing the need for manual operation and improving the automation level of production.
    Meet the needs of industrial production:
    Salt Electrolyzer can be better put into industrial production to meet the needs of enterprises to reduce production costs.

    Our address

    Baoti road,Jintai,Baoji city,Shaanxi,China

    Phone Number

    +0086 18391894207(WHATSAPP)

    modular-1

     

     

    Hot Tags: salt chlorine generator electrolyzer, China, suppliers, manufacturers, factory, customized, wholesale, buy, price, cheap, sale, quotation, in stock, free sample, Ruthenium Coating Titanium Anode, Lead Oxide Coated Titanium Anode, titanium anode for electrolysis, Pt Coated Titanium Anodes, Titanium Anode For Electrolytic Copper Foil, Titanium Anode For Sewage Treatment

(0/10)

clearall