Name: GR2 Titanium Block
Brand: Jmyun
SKU: 156365455

Products Description

Performance characteristics of GR2 pure titanium
Pure titanium is one of the most commonly used grades in industrial pure titanium, and its excellent properties are attributed to its high-purity metal composition. GR2 titanium material has extremely strong corrosion resistance, especially excellent performance in seawater, acidic and alkaline environments. This characteristic is particularly important in aviation and marine engineering. The density of GR2 titanium material is only half that of steel, but its strength is comparable, which can effectively reduce structural weight and increase equipment load efficiency.

The extensibility of GR2 is also a key highlight. Compared to other metal materials, GR2 titanium has excellent ductility and toughness, and can meet the precision forming needs of different components through cold and hot forming processing. The melting point of GR2 titanium material is as high as 1668 ℃, which makes it stable in high temperature environments. This characteristic makes TA1 deformed pure titanium widely used in equipment manufacturing under high temperature conditions.

Pure titanium block

GR2 Titanium Block slightly over half that of steel, and its high strength combination is the reason for the metals growing preference in both military and commercial aircraft.

Products Process

GR2 titanium block processing technology

Forging and rolling

GR2 Titanium Block process :Titanium sponge-Compacting electrodes-melting-Forge-Bar billets-Extruding-Rolled-Straightening-titanium block

titanium block process

Products Size

GR2 titanium forgings implementation standard:

GB/T16598--2013

GR2 titanium forgings block titanium cube GR2 pure titanium block (custom processing) brand:

Item	titanium block /titanium billet /titanium ingot
Material	gr1 gr2 gr5
Size	customed
MOQ	1KG
Property	high strength fine corrosion resistance low density and low weight
Tehnique	Forging ,Machining

Processing	size
Processing	Thickness (mm)	Width (mm)	Length (mm)
Hot Rolling	>4.75 - 60.0	400 -3000	1000 - 10000
cold Rolling	0.30 - 6	400 -2000	1000 - Max

titanium block price

Products Feature

GR2 Titanium Block have poor stamping properties but good thermoplasticity. The machining performance is good, and it requires hard, large cutting volume, slow speed, and sufficient cooling. It is one of the most widely used titaniums, and is used for parts that work for a long time below 400°C.

titanium block forged

Products Answer

Why is titanium so expensive?
Just look at its smelting process.
In fact, titanium itself is not expensive, but the expensive part is the processing process. Titanium ingots are dense, cylindrical metal blocks. They are the final product of titanium and the basis of titanium materials.
The smelting of titanium ingots mainly adopts the vacuum consumable electrode method, also known as the consumable furnace method. This method is to mix sponge titanium with alloy elements, press it into electrodes, and then smelt it in a vacuum arc furnace. Under the action of the arc, the electrode melts itself and drips into a water-cooled copper crucible to form a titanium ingot.

In addition, the processing of titanium ingots is also a very difficult process,The processing of titanium ingots mainly includes forging, rolling, annealing and other steps. It is necessary to use high-temperature, high-pressure, and high-speed equipment, and perform multiple heat treatments and cold treatments to make titanium plates, titanium tubes, titanium rods and other titanium materials. These processing processes will consume a lot of energy and materials, and will also cause the loss of titanium materials and the generation of waste, increasing the processing cost.

forging titanium block