Baoji Dynamic Trading Co., Ltd
Grade 5 Titanium Alloy 3D Printing Electrode Rod

Grade 5 Titanium Alloy 3D Printing Electrode Rod

3D Printing Titanium Raw Material makes it easier to manufacture titanium parts and avoids the impurities obtained withtraditional techniques during the welding phase. In the past few years, 3D printing has caught the public’s imagination. Our company had produced titanium wires and bars for many companies produce titanium powder

Send Inquiry
  • Description
    Products Description

    Grade 5 titanium alloy 3D printing electrode rod additive manufacturing specifications: electrode rod φ30mm-100mm

     

    Why are titanium and titanium alloys used for electrode rods for 3D printing?

    It has a series of advantages such as good mechanical properties and mechanical properties, high specific strength, low density, non-magnetic, high temperature resistance, small thermal expansion coefficient, good corrosion resistance, and no brittleness at low temperatures. Titanium alloys represented by Grade 5 are An alloy based on titanium with other elements added.

     

    Grade 5 titanium alloy 3D printing electrode rod additive manufacturing titanium alloy has the advantages of high temperature resistance, high corrosion resistance, high strength, low density and biocompatibility, etc., in aerospace, chemical, nuclear industry,Sports equipment and other fields have been widely used. It is also one of the main structural materials of contemporary aircraft and engines.

     

    Grade 5 titanium alloy rods for 3D printing In the automotive field, auto parts made of titanium and titanium alloys can save fuel, reduce engine noise and improve service life. Because titanium has good biocompatibility and affinity with the human body, and has the characteristics of light weight, corrosion resistance, odorless and harmless, it is widely used in pharmaceutical equipment, artificial joints, bone trauma and other fixation systems.

    titanium alloy electrode bar
    titanium electrode rod

     

    3D printing Grade 5 titanium alloy rod for 3D printing powder titanium rod TI-6AL-4V

    Grade 5 Titanium Alloy 3D Printing Electrode Rod Product Name: Titanium Rod, Titanium Alloy Rod, Electrode Rod

    Grade 5 titanium alloy 3D printing electrode rod material: TA1, TA2, TC4, GR1, GR2, GR5

     

    Grade 5 Titanium alloy 3D printing electrode rod executive standard: GB/T2965, ASTM B348, AMS 4928 standard

    Raw material selection: Sponge titanium above grade 0 is selected, the oxygen content is less than 500ppm, and it is smelted in a vacuum consumable electric arc furnace for 3 times to ensure uniform product composition and no segregation.

     

    Production process: Sponge titanium 3 times smelting-forging billet-rolling titanium rod-NC machining-ultrasonic testing-surface testing-packaging.

     

    Test items: Ultrasonic flaw detection, chemical composition and other items.

     

    Packing: wooden box packing.

     

    Application areas: additive milling, 3D printing and other fields.

    Products Show

    Grade 5 Titanium alloy 3D printing electrode rod parameter

    1.chemical composition:

    N≤0.05 C≤0.08 H≤0.015 O≤0.30 FE≤0.20 AL:5.5-6.75 V:3.5-4.5

    2.Mechanical properties:

    3.Tensile strength ≥ 895Mpa

    4.Non-proportional extension strength ≥ 825Mpa

    5.Elongation ≥ 10

    6.Section shrinkage ≥ 25

    cold-rolled titanium rod

     

    Grade 5 Titanium alloy 3D printing electrode rod

    Grade 5 Titanium alloy electrode rod

     

    This metal is strong, incredibly lightweight, and heat and chemical resistant. Normally, titanium is extremely challenging tomachine (contributing to its high cost), making it a great candidate for 3D printing. The most common 3D printed titanium isTitanium 64 (Ti-6Al-4V) and is used in situations when a very high strength to weight ratio is beneficial, such as aircraft.

     

    3D Printing Titanium Raw Material makes it easier to manufacture titanium parts and avoids the impurities obtained withtraditional techniques during the welding phase.
    In the past few years, 3D printing has caught the public’s imagination. Our company had produced titanium wires and bars for many companies produce titanium powder

    Company information

    Baoji City JM-TITANIUM Company is located in the middle section of Titanium Road, Baoji Nonferrous Metals Processing Plant, which is known as "China's Titanium City". Founded in 2005, the company has grown into a comprehensive enterprise engaged in the processing, production, distribution and R&D of rare and precious metal materials and chemical equipment and accessories after more than ten years of development. The company has a young, energetic, innovative and hard-working team with unique geographical, material and scientific research advantages to integrate and share resources in the non-ferrous metal industry centered on Titanium City.

    titanium-electrode-bar-company

    Target Market And Delivery

     

    disinfection titanium electrode shipping

    Contact

     

    phone.png

    Phone: +86-13369210920

    envelope.png

    Envelope: nicole@jmyunti.com

    address.png

    Address:Baoji city,Shaanxi Province, China

    address.png

    Whatsapp: +86-13369210920

    fax.png

    Wechat: +86-13369210920

     

    Hot Tags: grade 5 titanium alloy 3d printing electrode rod, China, suppliers, manufacturers, factory, customized, wholesale, buy, price, cheap, sale, quotation, in stock, free sample, titanium medical rod, Titanium Metal Round Rod, pure titanium round rod, titanium alloy hex bar, titanium Mokuti Bars, titanium alloy rod

(0/10)

clearall