Baoji Dynamic Trading Co., Ltd
Contact Us
  • TEL: +8613369210920
  • Phone: +8617392683735
  • Email: Nicole@jmyunti.com
  • Add: Interruption of Baoti Road, Weibin District, Baoji City, Shaanxi Province, China

Simple Identification Of The Quality Of Titanium Rods

Jul 19, 2024

1, Observe the surface condition


Matte surface phenomenon: The surface of fake and inferior
titanium rods often has a rough surface due to severe groove wear, resulting in irregular unevenness on the surface of the titanium material. Therefore, when making a purchase, special attention should be paid to whether the surface is flat and smooth.


Scratch marks: Fake and inferior titanium rods are prone to scratches during production and transportation, which are often caused by rudimentary equipment or improper operation. Deep scratches can reduce the strength of titanium materials and affect their effectiveness.


2, Check the cross-section and reinforcement section


Thin and low transverse bars: The transverse bars of fake and inferior titanium rods are usually thin and low, and there is often a phenomenon of insufficient filling. This is due to the manufacturer's pursuit of negative tolerance, resulting in excessive reduction in the first few passes during the rolling process.
Folding problem: Folding is a line defect formed on the surface of the titanium rod, which runs through the entire longitudinal direction of the product. Due to the pursuit of high efficiency and excessive compression, fake and inferior titanium rods are prone to producing earrings and folding during the next rolling process. Folding products are prone to cracking after bending, which seriously affects their strength.


3, Pay attention to color and luster


Color and luster: High quality titanium rods should have a metallic luster, while counterfeit titanium rods may appear light red or a color similar to pig iron. This is usually due to uneven raw materials, high impurities, or non-standard rolling temperatures.

 

news-1080-1440


4, Observe surface defects


Scaring phenomenon: The surface of fake and inferior titanium rods is prone to scarring, which is caused by impurities in the raw materials or rudimentary guiding equipment, leading to impurities adhering to the rolling mill and forming scars. Scaring can affect the appearance and performance of
titanium rods.


Crack problem: Cracks may also appear on the surface of counterfeit titanium rods, mainly due to their raw material being adobe and having many pores. During the cooling process, cracks are prone to occur due to thermal stress, and cracks are formed after rolling.


5, Check size and shape


Cross section shape: The cross section of counterfeit titanium rods may be elliptical rather than standard circular or square. This is due to the manufacturer using a larger pressing amount in the first two passes of the finished product roller in order to save materials. This shape of titanium rod not only affects aesthetics but also reduces strength
.
When selecting titanium rods, it is important to carefully observe their surface condition, inspect the cross-section and ribs, pay attention to color and gloss, and observe surface defects. Only by fully understanding and mastering these identification skills can we ensure the purchase of high-quality titanium rod products.

 

 

 

Country:China

Add:Baoti road,Jintai,Baoji city,Shaanxi,China

Cel/Whatsapp :+86 18309262795

Email:annie@jmyunti.com

Website:www.jm-titanium.com

 

news-1024-626