MMO Wire Anode Coated titanium anode wire for water heater
The core part of the water heater is an inner tank, which directly affects the safety performance, service performance and service life of the water heater. When selecting a heater, users should pay attention to the material, thickness, welding process, enamel glaze quality, coating and sintering process of the inner liner of the water heater.
In the process of using electric water heaters, water heater leakage, electricity leakage, and reduced water output sometimes occur. This phenomenon is likely to be caused by corrosion and perforation of the inner tank and heating tube caused by the failure to replace the magnesium rod in time after the consumption of the magnesium rod. Generally speaking, the magnesium rods of electric water heaters must be replaced every two years, but some manufacturers with poor manufacturing standards do not reach the design life, and they corrode quickly or even run out in less than a year, with short life span and frequent replacement. , Increased use cost, etc. are many drawbacks of magnesium rod anti-corrosion technology. The inner tank life of water heaters is a prominent problem that plagues the water heater industry. Once the inner tank of the water heater leaks, it represents the termination of the water heater's life and even brings economic losses to users. The main reason for the leakage of the water heater is the corrosion of the anions in the tap water. The water quality varies greatly across China. It is difficult to find a technology to protect all water quality.
The precious metal oxide coated titanium anode wire produced by Baoji JM-TITANIUM is small in size, light in weight, and capable of deodorizing. The titanium anode wire and the water heater tank form a loop that uses tap water in the water heater as the conductive medium. When the current passes through the electrode, the Cl- in the tap water moves to the metal oxide-coated titanium anode wire as the anode, and concentrates near the anode. The Cl- concentration of the water heater as the cathode will be greatly reduced, which slows down the water heater. The corrosion rate of the inner tank greatly prolongs the service life of the inner tank of the water heater. Welcome to consult!
product information
| Substrate | GR1 GR2 |
| Size | Dia3.0*340MM Dia3.0*490MM Dia2.0*200MM Dia2.0*470MM |
| Features | With higher electrical conductivity; High chlorine evolution potential ; Stronger Oxidation ability; Higher Anti-corrosion ; Longer lifetime; 5000-12000Hours Higher efficiency; |
| Coating type | Ruthenium-Iridium titanium anode Ruthenium-Iridium-stannum titanium anode Iridium-Tantalum titanium anode Ruthenium-titanium anode Platinum titanium anode Ru-Ir-PT Titanium anode Lead dioxide titanium anode |
| Manufacturing processes | 1)Pretreatment:choosing right material, cutting ,welding accordingly , annealing ,cleansing ,acid etching 2) Preparing noble metal: be made up in proportion of mol according to customer's application 3) Brush painting :coated by 18 to 20 times 4) thermal decomposition of oxidation |
Product name: Water heater electronic anode rod-mmo coated anode titanium rod titanium wire
Product specifications: Φ3.0*340mm / Φ3.0*490mm or made according to customer drawings
MMO coating: iridium-tantalum coating/ruthenium-iridium coating
Product color: impressed current cathodic protection method
Material composition: titanium-based coated electrode, PVC nut and accessories, etc.
Application MMO coated titanium wire anode is suitable for direct burial in fine sand, carbonaceous backfill or immersion in fresh or saline waters. MMO-Ti wire anode can be connected to a feed cable at one end or ‘piggybacked’ to form a continuous anode suitable for installation under storage tanks or to provide continuous close protection for pipelines. Wire anodes can also be used to protect the internal surfaces of water tanks where their malleable shape permits even current distribution in areas where there can be large variations in water level.
The electronic anode rod has two models, one is a titanium-based coated anode rod (anode wire) with a threaded cap, and the other is a welded anode rod (anode wire). For specific specifications, please contact customer service.
Hot Tags: coated titanium anode wire, China, suppliers, manufacturers, factory, customized, wholesale, buy, price, cheap, sale, quotation, in stock, free sample, Ruthenium Coating Titanium Anode, Titanium Equipment, titanium anode for electrolysis, Titanium Anode For Swimming Pool Disinfection, Lead Oxide Coated Titanium Anode, Titanium Anode For Electrolytic Copper Foil
