Baoji Dynamic Trading Co., Ltd

Will Ruthenium-iridium titanium electrode cutting destroy the coating?

Sep 27, 2024

Gmail:alisa@jmyunti.com

Cutting of ruthenium-iridium-titanium electrodes will damage the coating. Titanium anodes have excellent conductivity and corrosion resistance, and their service life is much higher than that of lead anodes. They can work stably for more than 4,000 hours, and their cost is low. They will be the inevitable trend of the development of electroplating zinc and tin production at home and abroad. Not only does it greatly save electroplating energy consumption, but also because it can increase the electroplating current density, it creates conditions for the production of thick galvanized and tin steel plates.

info-1200-600
1. According to the gas precipitation of the anode in the electrochemical reaction, the chlorine anode is called the chlorine anode, such as the ruthenium-coated titanium electrode: the oxidized anode is called the oxygen anode, such as the iridium-coated titanium electrode and the platinum titanium mesh/plate. Chlorine anode (ruthenium-coated titanium electrode): The chloride ion content in the electrolyte is high, generally in the hydrochloric acid environment and the electrolysis of seawater, and the electrolysis of salt water environment. The corresponding products of our company are ruthenium-iridium-titanium anode and ruthenium-iridium-tin-titanium anode.
2. Oxygen anode (iridium-coated titanium electrode): The electrolyte is generally a sulfuric acid environment. The corresponding products of our company are iridium tantalum anode, iridium tantalum tin titanium anode, and high iridium titanium anode.
3. Platinum-coated anode: titanium is the substrate. The surface is coated with platinum, and the coating thickness is generally 0.5-5μm. The mesh size of the platinum titanium mesh is generally 12.5×4.5mm or 6×3.5mm.
The ruthenium iridium titanium anode has a certain working life during the electrolytic operation. When the voltage rises very high and there is actually no current passing through, the ruthenium iridium titanium anode loses its function. This phenomenon is called anode passivation. The titanium ruthenium iridium titanium anode consists of a titanium substrate and a ruthenium iridium titanium active coating. Only the ruthenium iridium titanium active coating plays an electrochemical reaction role. If the coating and the substrate are not firmly bonded, they will fall off from the titanium plate substrate. When they fall off to a certain extent, the titanium ruthenium iridium titanium anode loses its function. (It is divided into crushing shedding, convex belly peeling and cracking shedding) Reducing the occurrence of oxygen can slow down the formation of oxide film. When the total current density of electrolysis increases, the increase in the rate of chlorine generation is much greater than the increase in the rate of oxygen generation, so the increase in current density is conducive to the reduction of oxygen content in chlorine. The titanium substrate is pre-oxidized to form an oxide film first, which can increase the bonding force between the ruthenium iridium titanium active coating and the titanium substrate, making the coating firm and preventing the ruthenium from falling off and dissolving, but it will also cause the ohmic drop of the ruthenium iridium titanium anode to increase.

 

Company: Baoji Dynamic Trading Co., Ltd

Country:China

Add:Baoti road,Jintai,Baoji city,Shaanxi,China

Cel:+86 18391896637(WHATSAPP)/18391894207

Gmail:alisa@jmyunti.com

Website:www.jm-titanium.com