Ruthenium-iridium titanium electrode for shrimp pond treatment and how to install?

Gmail:alisa@jmyunti.com

Ruthenium-iridium-titanium electrodes have potential application value in shrimp pond treatment, mainly in two aspects: water purification and disease prevention and control. The following is a specific analysis of its application:

1. Water purification
Descaling and hardness reduction:
Ruthenium-iridium-titanium electrodes can adsorb and remove calcium ions (Ca²⁺) and magnesium ions (Mg²⁺) in water through electrochemical oxidation-reduction reactions, forming calcium carbonate and magnesium hydroxide precipitation, thereby reducing the hardness of the water. This process helps to reduce scaling in shrimp pond water and keep the water clear and stable.
Removal of harmful substances:
Under the action of electric current, ruthenium-iridium-titanium electrodes can also produce hydroxide ions (OH⁻), which can destroy the structure of harmful substances in the water, such as ammonia nitrogen, nitrite, etc., thereby reducing their toxicity and providing a safer living environment for shrimp.
2. Disease prevention and control
Bactericidal algae removal:
The strong oxidants produced by ruthenium-iridium-titanium electrodes during the electrolysis process, such as hypochlorous acid, have strong bactericidal ability. These strong oxidants can destroy the cell structure of bacteria, fungi and algae, inhibit their growth and reproduction, and thus effectively prevent and control diseases in shrimp ponds.
Improve water quality stability:
By reducing water hardness and removing harmful substances, ruthenium iridium titanium electrodes can improve the stability of shrimp pond water quality. A stable water quality environment helps the growth and development of shrimp and reduces the risk of stress and disease caused by water quality fluctuations.

3. The installation of ruthenium iridium titanium electrodes in shrimp ponds usually involves the following steps:

Prepare tools and materials: Make sure you have all the necessary tools and materials, including ruthenium iridium titanium electrodes, cables, junction boxes, power supplies, etc.
Determine the installation location: According to the size and shape of the shrimp pond, choose a suitable electrode installation location. Generally, the electrode should be installed in the center or near the center of the shrimp pond to ensure uniform current distribution.
Install the electrode: Fix the ruthenium iridium titanium electrode in the shrimp pond. The electrode can be fixed in the water by a bracket or rope to ensure that the electrode does not sink to the bottom or float on the water surface.
Connect the cable: Connect the electrode to the junction box via the cable. The cable should be of appropriate length to avoid entanglement or drag in the water.
Install the junction box: The junction box should be installed in a dry location at the edge of the shrimp pond to connect the power supply and control equipment.
Connect the power supply: Connect the junction box to the power supply. The power supply should provide appropriate voltage and current to meet the needs of the electrode.
Test the electrode: Add an appropriate amount of salt water to the shrimp pond, then turn on the power supply to test whether the electrode is working properly. Check whether the current and voltage meet the requirements and whether there are bubbles around the electrode.
Adjustment and maintenance: Depending on the actual situation, the position or angle of the electrode may need to be adjusted to ensure the best current distribution. At the same time, regularly check whether the connection between the electrode and the cable is firm and whether the electrode has signs of corrosion or damage.
Please note that the specific installation steps may vary according to different shrimp pond conditions and needs. During the installation process, all safety instructions and operating procedures should be followed to ensure the safety of personnel and equipment.

info-1000-750