What is the universal electroplating hanger suitable for?

What is the universal electroplating hanger suitable for?

Universal electroplating hangers are suitable for a variety of parts and processes. The form and structure of universal electroplating hangers should be determined according to the geometric shape of the plated parts, the technical requirements of the coating, the process methods and the size of the equipment. For example, sheet-shaped plated parts will drift down due to the resistance of the plating solution between the upper and lower processes. When selecting a hanger, the plated parts should be clamped or tied with copper wire. If the plated parts are heavy and have holes, a hook-shaped hanger can be selected. The requirements for use are as follows:

(1) Hangers used for manual operation. The loading weight is generally 1~3kg.

(2) The hook should have sufficient conductive area and its type should ensure good conductivity. The hanger hook should be cleaned frequently.

(3) When using, be careful to load and place with care and try not to damage the insulating layer. Otherwise, the hanger and the workpiece will compete for electricity, resulting in partial failure or roughness of the workpiece, affecting the quality of the coating.

(4) After use, the hanger should be cleaned and properly stored for future use.

(5) After using the hanger for a period of time, it is necessary to promptly remove the coating on the hanger to ensure good conductivity. If cracks appear on the insulation layer of the hanger, it is necessary to promptly repair or re-insulate it.

info-750-750