1. When installing titanium and titanium alloy pipes, care should be taken not to contact or collide with iron materials when transporting and storing titanium and titanium alloy pipes. 2. Mechanical methods should be used for cutting titanium and titanium alloy pipes, and the cutting speed should be low. When cutting or grinding titanium pipes with grinding wheels, special grinding wheels should be used; flame cutting should not be used. The groove should be processed mechanically.
3. Titanium and titanium alloy pipes should be welded by inert gas shielded welding or vacuum welding. Oxygen-acetylene welding or carbon dioxide gas shielded welding should not be used, nor ordinary manual arc welding.
4. When installing titanium and titanium alloy pipes, iron tools and materials shall not be used to knock and squeeze; Do not directly contact with titanium and titanium alloy pipes; when titanium and titanium alloy pipes pass through walls and floors, sleeves should be installed, the gap should not be less than 10mm, and insulation should be filled, and the insulation should not contain iron impurities.
5. Titanium and titanium alloy pipes should not be directly welded with other metal pipes. When a connection is required, a looper flange connection can be used. The non-metallic gaskets used are generally rubber gaskets or plastic gaskets, and the chloride ion content should not exceed 25ppm.
Contact us for more information. Thank you
Nicole
Company: Baoji Jimiyun Dynamic Co., Ltd
Cuntry:China
Add:Baoti road,Jintai,Baoji city,Shaanxi,China
Cel:+86 13369210920
Gmail:nicole@jmyunti.com
Website:www.jm-titanium.com
