Industrial pure titanium is divided into GR1, GR2, GR3 and GR4 according to its impurity content. The interstitial impurity elements of these four types of industrial pure titanium gradually increase, so their mechanical strength and hardness also increase step by step, but their plasticity and toughness decrease accordingly.
Industrial pure titanium commonly used in industry is GR2, because of its moderate corrosion resistance and comprehensive mechanical properties. GR3 can be used when higher requirements on wear resistance and strength are required. GR1 can be used when better molding properties are required.


GR1 and GR2 have good low temperature toughness and high low temperature strength when the iron content is 0.095%, the oxygen content is 0.08%, the hydrogen content is 0.0009%, and the nitrogen content is 0.0062%, and can be used as below -253℃ low temperature structural materials.
GR2 chemical composition: GR2 contains titanium (Ti) balance, iron (Fe) ≤ 0.30, carbon (C) ≤ 0.10, nitrogen (N) ≤ 0.05, hydrogen (H) ≤ 0.01 5, oxygen (O) ≤ 0.25.


Allowable deviation of outer diameter of titanium pipe (mm)
| outer diameter | 3~10 | >10~30 | >30~50 | >50~80 | >80~100 | >100 |
| allowable deviation | ±0.15 | ±0.30 | ±0.50 | ±0.65 | ±0.75 | ±0.85 |


Pure Titanium tube application:
The titanium tube is light in weight, high in strength and superior in mechanical properties. It is widely used in heat exchange equipment, such as shell and tube heat exchangers, coil heat exchangers, serpentine heat exchangers, condensers, evaporators and conveying pipes, etc. Many nuclear power industries use titanium tubes as standard tubes for their units. Titanium alloys are mainly used to make aircraft engine compressor parts, followed by structural parts of rockets and high-speed aircraft.



Pure Titanium tube Features:
1. Acid and alkali corrosion resistance, seawater corrosion resistance, sewage corrosion resistance;
2. Low density (4.51), light;
3. Non-magnetic;
4. When used between -253°-600°, its tensile strength, in metal, is almost the same.



The corrosion resistance of titanium tubes in wet conditions exceeds that of other commonly used metals. This is because chlorine has a strong oxidizing effect. Titanium and titanium alloys can be in a stable passive state in wet chlorine. of water content. The critical water content is related to factors such as oxygen pressure, flow rate, temperature, etc., as well as the shape and size of titanium equipment or parts and the degree of mechanical damage to the titanium surface. Therefore, the critical water content of titanium tubes for passivation of titanium in oxygen is inconsistent. , It is generally believed that the mass fraction of 0.01% to 0.05% can be used as the critical water content of titanium in oxygen, but practical experience has pointed out that in order to ensure the safe use of titanium equipment in oxygen, sometimes the mass fraction of water is 0.6%. Not enough, need up to 1.5%. The critical water content also increases with increasing temperature and decreasing airflow velocity. After the surface oxide film of titanium and titanium alloys is damaged, higher water content is required to re-passivate titanium and titanium alloys.
Contact us for more information. Thank you
Nicole
Company: Baoji Jimiyun Dynamic Co., Ltd
Cuntry:China
Add:Baoti road,Jintai,Baoji city,Shaanxi,China
Cel:+86 13369210920
Gmail:nicole@jmyunti.com
Website:www.jm-titanium.com
Hot Tags: pure titanium tube, China, suppliers, manufacturers, factory, customized, wholesale, buy, price, cheap, sale, quotation, in stock, free sample, titanium square pipe, titanium tube welding, orbital tube welding titanium, mig welding titanium tubing, titanium exhaust pipe for motocycle, 5 inch titanium exhaust tube








