Name: Titanium Anodizing Jigs
Brand: Jmyun
SKU: 236879083

Products Description

In the production of electroplating and conversion treatment, it is a very important link to choose the appropriate hanger to ensure the quality of the coating, improve the production efficiency and reduce the labor intensity. In the production of electroplating and conversion treatment, the hanger has the following functions.

1, support, fix and mount parts.

2, connected with the electrode on the groove has a conductive effect, so that the current is evenly transmitted to the parts.

3, make up for the uneven coating distribution caused by the limitation of the performance of the plating solution.

Product Name	Customized GR2 Titanium Jigs Racks with Clips for Anodizing Surface Treatment
Dimension	Tooth：15/20/30/36/42 etc Thickness:1.5mm/1.8mm/2.0mm etc Outer diameter:225mm/252mm etc
Feature	1. Anti-corrosion 2. Light weight 3. High magnetic 4. Long lifespan
Package	The surface of the product is wrapped in film, and the outside is packed in cartons or wooden cases
Delivery time	The spot size is delivered within 3 days, and the customized goods are delivered within 15 days
custom	Support customization

Products Picture

titanium jig price

Company Introduction

The company has strong scientific and technological strength, advanced and mature production processes, and rich experience in product working conditions, forming the following series of products:
1, Composite products mainly consisting of titanium copper, zirconium copper, stainless steel copper, composite rods, wires, tubes, plates, etc;2. Iridium-tantalum coated titanium anode, platinum-titanium anode, ruthenium-iridium-titanium anode
3. Titanium basket, titanium fixture, titanium hanger.
4. Titanium raw materials

Factory picture

Advantages of titanium Anodizing jig

Titanium anodizing jig play an important role in jewelry plating. Compared with other electroplating methods, the hanging plating can ensure the uniformity and adhesion of the coating, and avoid the possible mobilization, adhesion and caking problems in the frame plating. I once had a necklace with an intricate design, after choosing to hang plating, every detail of it was evenly covered, and there was no need to worry about fading and wear. Hanging plating is especially suitable for complex shapes, such as rings and necklaces, to ensure that every part is evenly plated. In addition, the process of hanging plating can greatly improve the color retention quality of the jewelry, so that they remain bright and beautiful in long-term use.

Application

How to choose the appropriate plating method?

Choosing an appropriate plating method requires consideration of the shape, size and production process of the workpiece. For complex accessories, such as necklaces and rings, hanging plating is the best choice because it ensures that every detail is evenly plated.

For small parts or small areas requiring maintenance, roller plating or brush plating may be more suitable. Automated production lines are also a common choice in fixed-model manufacturing such as consumer electronics.

When selecting the plating method, it is necessary to consider the design, production efficiency and quality requirements of the product. I consider these factors in detail when choosing the plating method to ensure the best condition of the jewelry.

titanium Anodizing jig

The structural form of the fixture should be determined based on the shape, structure, and size of the oxidized parts, and consideration should be given to ensuring that the parts clamped by the fixture are in contact with the solution and allowing for free passage of the solution when placed in the slot.
(1) For small round or flat parts, tongue spring clamps and spring clamps can be used;
(2) For small and angular parts, basket shaped containers can be used;
(3) For large parts (small and medium-sized parts can also be used), thick pure aluminum wire can be inserted and fixed in unimportant holes on the parts, and then hung on the pole for processing

For jig materials, both good conductivity and certain corrosion resistance are required. If the surface of the fixture is not coated with a protective layer, pure titanium or the same material as the workpiece can be used for manufacturing. In order to save electricity and extend the service life of the fixture, except for the parts in contact with the oxidized parts, all other parts of the fixture should be coated with a covering layer for insulation.

Most electroplated products are processed through the hanging plating process, and the name of the hanging tool is derived from it, but it is by no means the same. The position, direction, quantity of the plated parts on the hanging fixture, as well as the distance and relative position of the front, back, left, right, top and bottom plated parts, all have an important impact on the quality and production efficiency of the electroplated products.

Precautions for using titanium Anodizing jig

(1) The loading weight of the hanger used is generally 1~3kg.

(2) The hook should have a conductive area, and its type should be good conductive. The hook of the titanium hanger should be cleaned frequently.

(3) When using, should pay attention to light, try not to damage the insulation layer. Otherwise, it will cause power grab between the hanger and the workpiece, resulting in the phenomenon of local plating or rough workpiece, affecting the quality of the coating.

(4) After the titanium Anodizing jig is used, it should be cleaned and stored centrally and properly for backup.

(5) After a period of use, the hanger should be treated in time and the coating on the hanger should be removed to ensure good conduction. The insulation layer of the hanging device is cracked, and it should be repaired or re-insulated in time.