

Applications of titanium in modern aircraft and engines?
Modern aircraft and engines in the important high-temperature alloy, aluminum alloy, titanium alloy, ultra-high strength steel, composite materials and other five categories of structural materials. Titanium is mainly used in the following aspects of aircraft:
1. Titanium alloy material for aircraft structure
Titanium alloy has a series of advantages such as high specific strength, good corrosion resistance and high temperature resistance, and can be used in various ways of parts forming, welding and machining, so it has been widely used in advanced aircraft and engines. Nowadays, the percentage of titanium alloy in the weight of aircraft structure has become one of the important indicators to measure the advanced degree of aircraft materials. Titanium makes up 39% of the structural weight of the F-22. The application of Baoji titanium anode titanium alloy in foreign civil aircraft also increases with the improvement of aircraft design and performance level. High damage tolerance performance is an important material performance index for long life, high mobility, low cost and damage tolerance design of new generation fighter aircraft (including high thrust ratio engine). The United States takes the lead in successfully applying the damage safety design concept and damage tolerance design criteria to advanced fighter aircraft. F-22 fighter aircraft adopts a large number of damage tolerance titanium alloy and its large integral components to meet the design requirements of high weight loss and long life. Ti-6Al-4VELI has been used in the oversize forgings of American C-17 military transport aircraft. Baoji titanium anode high strength titanium alloy Ti-6-22-22S has also been used in the key parts of C-17 aircraft such as the horizontal tail joint (rotating shaft). The use of these two titanium alloys makes the life of large transport aircraft up to 60,000 flight hours or more. In Europe, the Airbus A380 was the first aircraft to have an all-titanium pylon, which will be used on future A350s.
2. High temperature titanium alloy for aeroengine
High temperature titanium alloy is mainly used in the manufacture of aero-engine compressor blades, discs, casing and other parts, which require materials with high specific strength, creep resistance at high temperature, fatigue strength, lasting strength and organizational stability under high temperature working conditions (300~600℃). With the increase of thrust-weight ratio of aero-engine, the operating temperature of high temperature titanium alloy blades and discs increases with the increase of outlet temperature of high pressure compressor. After decades of development, the high working temperature of solid solution strengthened high temperature titanium alloy has been increased from 350℃ to 600℃. The high temperature titanium alloy TC4 and TC6 are mainly used in the aero engine with the working temperature below 400℃, which are used in the engine with low working temperature of fan blades and compressor blades of the first and second stage. The high temperature titanium alloys working at around 500℃ include TC11, TA15 and TA7 alloy, among which TC11 is the titanium alloy used in our current aeroengine. It is difficult to meet the requirements of creep resistance and strength at temperatures above 600℃ for titanium alloy only strengthened by solid solution. Due to its high specific strength, specific stiffness, high creep resistance, excellent oxidation resistance and flame retardant properties, ordered strengthened Ti-Al intermetallic compounds have become very potential candidates for use at temperatures above 600℃. Ti3al-based alloys work at about 650℃ for a long time, while TiAl alloys work at 760℃~800℃.
3. Aircraft titanium alloy fasteners
Titanium alloy fasteners can greatly reduce the weight of the aircraft, can not only improve flight performance, but also reduce the cost of use, the main is to reduce fuel consumption. About 200,000 titanium alloy fasteners are needed for each of China's homegrown c919 aircraft, with 20 million needed to complete the first 100 start-up orders. With the planned production of 150 large aircraft by 2018, 30 million titanium fasteners would be needed annually. Titanium alloy fastener development potential is huge, the market development prospect is very promising.
China's civil aircraft fleet is expected to reach 6,309 by the end of 2031, 3.6 times the current size. Due to the characteristics of China's air route network structure, the future fleet composition will still be dominated by single-channel trunk aircraft, but the proportion of wide-body trunk aircraft and regional aircraft will increase. China will need 4,933 more civilian airliners over the next 20 years due to growth and replacement needs from decommissioning. Experts say that in the long run, China's sustained economic growth, accelerated urbanization and consumer upgrade will be conducive to the sustainable development of air transport. High oil prices and strict environmental protection requirements also make airlines speed up the retirement of old aircraft. To accelerate the industrialization of civil airliner, the next 10 years will be a critical period for the leapfrog development of Chinese aviation industry, and the titanium industry will face a rare opportunity for development.
Company: Baoji Dynamic Trading Co., Ltd
Country:China
Add:Baoti road,Jintai,Baoji city,Shaanxi,China
Cel:+86 18391896637(WHATSAPP)
Gmail:alisa@jmyunti.com
Website:www.jm-titanium.com









