Titanium alloy bar, the processing flow from sponge titanium to blank. Compression electrode, the sponge titanium is pressed through a press to form a dense sponge titanium pressed block electrode.
The processing flow of titanium alloy bar from sponge titanium to blank is as follows:
1) Press the electrode, press the sponge titanium through the press to form the dense sponge titanium pressing block electrode;
2) Vacuum casting, under the conditions of 1700-1800 ℃ and -103Pa, vacuum casting the above-mentioned sponge titanium compact electrode for three times;
3) Open the billet, under the condition of 1000 ℃, open the billet through a hydraulic press, and finally press it into a square billet;
4) For the first rolling, under the condition of 970～980℃, use a rolling mill to preliminarily roll into a cylindrical shape blank;
5) The second rolling, under the condition of 950°C, is rolled into a blank with a rolling mill.
Contact us for more information. Thank you
Nicole
Company: Baoji Jimiyun Dynamic Co., Ltd
Cuntry:China
Add:Baoti road,Jintai,Baoji city,Shaanxi,China
Cel:+86 13369210920
Gmail:nicole@jmyunti.com
Website:www.jm-titanium.com
