Baoji Dynamic Trading Co., Ltd

Introduction and application of titanium anode for electroplating industry

Nov 24, 2022

In the electroplating application field, the required plating metal is dissolved in the electrolyte, the plated metal matrix is used as the negative electrode, and the anode is used as the stop electrode, which forms a complete current transmission cycle. The chemical reaction that takes place simultaneously with electroplating in the electroplating tank is to precipitate oxygen on the anode surface.


Compared with non inert anodes such as graphite, the advantage of titanium anode is that it can maintain a stable distance between positive and negative electrodes (distance between electrodes) within its service life. Graphite anode will gradually dissolve in use, leading to an increase in the distance between electrodes, while inert titanium anode can ensure a stable voltage and product quality. Due to the catalytic properties of platinum group elements, the exchange current density value on the electrode surface is large, the oxygen precipitation overvoltage is low, and a special process is used to make a micro structured oxide film on the titanium surface, which can obtain a large active surface area on the unit electrode area. Therefore, it is particularly suitable for high-speed and high current density electroplating production.


In addition to titanium anodes and graphite, lead anodes can also be used in this field. However, when lead is anodic dissolved, the reactants will have a negative impact on the environment. These problems can be avoided if titanium anode is used. The working voltage of titanium anode for oxygen evolution is low, so it can also save energy.


Another advantage of using titanium anodes is that titanium substrates can be reused. When the service life of titanium anode coating reaches its service life, anodized aluminum foil is a material commonly used in lithography industry. Its working principle is the same as the electroplating process. A very thin layer of metal is coated on the surface of the base metal. By putting aluminum in an anodic state, the surface of aluminum will be oxidized. After the anodizing (oxidation) process of aluminum, the surface of aluminum can better stick to the stage with the photosensitive coating required in the lithographic printing industry.


In the electroplating metal industry, anodes are used for electroplating various substrates, from small batch production of jewelry to continuous large-scale production of electroplating steel plates. The company's anode products help realize the diversification of electroplating substrates, and their diversification is also reflected in the diversification of the company's anode products. The company's machining department and strictly selected suppliers enable the company to produce anode products with a wide range of applications and various shapes.


advantage:


1. Low cell voltage and low energy consumption;


2. The electrode loss rate is small and the size is stable;


3. The corrosion resistance of the electrode is good, and the anode is less immersed in the ferry solution to keep the ferry solution clean, so that the performance of the coating is more reliable;


4. The titanium anode adopts new materials and structures, which greatly reduces its weight and facilitates daily operation;


5. Long service life, and the matrix can be reused to save costs;


6. The oxygen evolution overpotential is about 05V lower than that of lead alloy insoluble anode, which reduces the tank voltage and energy consumption.



Company: Baoji Dynamic Trading Co., Ltd

Country:China

Add:Baoti road,Jintai,Baoji city,Shaanxi,China 

Cel/Whatsapp :+86 18309262795

Email:annie@jmyunti.com

Website:www.jm-titanium.com