Name: China Customized Titanium Capillary Tube Suppliers, Manufacturers, Factory - Wholesale Price - JMYUN
Brand: Jmyun
SKU: 168183891

GR1 belongs to alpha gold phase titanium material, because of its low iron and oxygen content, it is the best plastic in titanium material. Generally, it is mainly used to make medical equipment. Our company can produce high quality GR1 titanium capillary tube.

Titanium capillary tube (2)

The specifications that can be manufactured at present are as follows, and can be customized according to user requirements.

Dimensions: outer diameter Φ0.2～Φ8mm, wall thickness T0.015～0.5mm.

High precision: outer diameter Φ±0.003mm, wall thickness T±0.005mm, length L±0.05mm.

Titanium capillary tube (6)

Titanium capillary tube implements two national standards according to different use requirements and performance: GB/T3624-2010 GB/T3625-2007 ASTM 337 338

Titanium capillary tube supply grades: TA0, TA1, TA2, TA9, TA10, BT1-00, BT1-0, Gr1, Gr2

skills requirement

1. The chemical composition of titanium and titanium alloy pipes should meet the requirements of GB/T3620.1,

2. The allowable deviation of the outer diameter of the pipe should meet the requirements in Table 1.

3. The allowable deviation of the wall thickness of the pipe should not exceed ±12.5% of its nominal wall thickness. The allowable deviation of the wall thickness of the pipe is not applicable to the weld of the titanium welded pipe.

4. The length of the pipe should meet the requirements in Table 2.

5. The fixed-length or double-length length of the pipe should be within the range of its indefinite length. The allowable deviation of the fixed-length length is +10mm. The double-length length should also be included in the incision amount when the pipe is cut, and the amount of each incision should be 5mm.