Products Description
Why use titanium wire to make titanium glasses frames?
Mainly because titanium and titanium alloys have a series of irreplaceable excellent properties. There are three main advantages: high specific strength, light weight and toughness. The density of titanium is 4.51 g/cm3, which is 57% of steel and less than 2 times that of aluminum. However, the tensile strength is 3 times that of aluminum. Among commonly used metals Among materials, titanium alloy has the largest specific strength of 29 (MPa/cm3/g), which is 3.5 times that of stainless steel, 1.3 times that of aluminum alloy, and 1.7 times that of magnesium alloy. It has strong corrosion resistance because titanium and titanium alloys have a A thin, solid oxide film with strong corrosion resistance, which is highly resistant to chemical substances and various household wastes, as well as human sweat and other excretions; excellent biocompatibility, titanium and Titanium alloys have excellent compatibility with body fluids and other organs.
| Product Name | Ti-15V-3Cr-3Al-3Sn titanium alloy wire for eyeglasses frame |
| Titanium Grade | GR1/GR2/GR3/Gr4/GR5/GR7/GR9/GR12/Gr5Eli/Gr23
ERTi-1/ERTi-2/ERTi-3/ERTi-4/ERTi-5Eli/ERTi-7/ERTi-9/ERTi-11/ERTi-12
Ti15333/Nitinol Alloy
|
| Shape | Titanium Coil Wire/Titanium Spool Wire/Titanium Straight Wire |
| Process | Bar billets-hot rolling-drawing-annealing-strength-pickling |
| Surface | Polishing, picking, acid washed, black oxide |
| Main Technique | Hot Forged; Hot Rolled; Cold drawn; Straighten etc |
| Application | Welding, Industry, Medical, Aerospace, Electronic etc |
Characteristics of titanium alloy spectacle frames: Titanium alloy spectacle frames have low density, high strength, good mechanical properties and strong corrosion resistance. The glasses frames made are very light and not easily corroded by moisture. .However, due to the poor process performance of titanium alloy and the cutting process is very difficult, the spectacle frames made absorb more chemical impurities such as hydrogen, oxygen, nitrogen, and carbon. .The wear resistance of titanium alloy is relatively poor and the production process is relatively complex. Therefore, every time you use this material to make eyeglass frames, the cost is relatively high and the workmanship is more complicated, so it is much more expensive than ordinary eyeglass frames. .Spectacle frames made of titanium alloy have a much lower density than ordinary spectacle frames, so they are very strong and will not easily fall off or damage the skin.
Titanium alloy glasses frames are slightly heavier than pure titanium glasses frames, but both are high-quality materials, so they feel more comfortable in appearance. During the welding process, glasses frames made of pure titanium materials will not come into contact with oxygen in the vacuum; while glasses frames made of titanium alloy materials are welded (called: spot welding), the welding traces are like a "slope" shape, which is One of the most effective ways to differentiate between these two types of eyeglass frames. .Pure titanium eyeglass frames will not be in direct contact with titanium in the hinge area; while titanium alloy eyeglass frames will be in direct contact with titanium, which can easily cause wrinkles at the joints and obvious uneven opening and closing of the temples. .The specific gravity of pure titanium is generally 4.5, while that of titanium alloy is 8.9. The material is equivalent to half of that of titanium alloy. Therefore, the made spectacle frames are lighter when weighed by hand. This is the easiest way to distinguish the two spectacle frames.
Ti -15333 Ti alloy wire of the composition is Ti-15V-3Cr-3Sn-3Al.
This material has the characteristic of light weight, high hardness, corrosion resistance, no rust, good thermal conductivity, good touch, non-allergic material . So it is specially used for making glasses.
Our company specializes in producing Ti-15333 titanium wire for eyeglasses frames, welcome to learn more.
Products show
Company introduction
Baoji JM-Titanium Industry Co., Ltd. was established in June 2013, covering an area of 23.7 acres (approximately 15,800.08 square meters), with a total construction area of more than 10,341 square meters, a factory covering an area of about 8,000 square meters, and an office area Approximately more than 2,000 square meters.
Our company currently has a total of 150 scientific research, production, technical and sales personnel. Since its establishment, the company has relied on its own scientific and technological strength to develop, design and manufacture a set of manufacturing equipment using international technology to produce high-quality pure titanium and alloy wires, titanium-nickel memory alloy wires, welding rod wires, and hanging wires. Rods, etc. Provide high-quality titanium alloy wire products for aviation, aerospace, shipbuilding, manufacturing, chemical industry, automobile manufacturing industry and civilian medical device products.
01
High Quality
Advanced equipment creates exquisite workmanship, and the manufacturing process has reached the domestic advanced production level, improving the quality of titanium wire.
02
Complete categories
high-quality pure titanium and alloy wires, titanium-nickel memory alloy wires, welding rod wires, and hanging wires. Rods, etc.
03
Support customization
The automated production line meets the individual needs of special titanium wire users and can be customized according to customer requirements.
04
Custom Service
Professional technical personnel provide guidance on material selection and after-sales technical support.
Product Process
Titanium glasses, which are currently more popular, are derived from the characteristics of titanium metal, which is light, not easy to break, highly elastic, super corrosion-resistant, good to the touch, non-allergenic and memory-resistant, and has gradually become a new type of glasses frame material. The wearer will no longer have to worry about the discoloration and dullness of the glasses after long-term use. No matter in terms of materials, frames, or suitability for people, it can be said to be an excellent choice!
However, titanium frames are more expensive than other metal, plate or plastic frames. Titanium is not a rare metal. Its reserves rank fourth after aluminum, iron, and magnesium, and are 16 times the earth's combined reserves of copper, nickel, lead, and zinc. It stands to reason that scarce resources will have higher prices. The reserves of titanium metal are so large. Why are titanium frames more expensive than frames made of other materials?
First, the current refining cost of titanium metal is too high, and the requirements for buckling, stamping, cutting and welding are very high; second, the production process of titanium metal frames is complicated. The production of titanium frames requires special processing equipment, special welding technology and electroplating technology. It has many processing steps and high production costs. In particular, some glasses use pure titanium and beta titanium, which are the most difficult to process. Pure titanium is very soft and "sticky" and is very active at high temperatures, making it difficult to process.
Why Chooes Us?
why choose us?
We are a professional source titanium wire manufacturer. The company has 10+ production experience and a complete and scientific quality management system. After years of development, the company's products sell well in the United States, Germany, France, Japan, South Korea, India, Singapore and other places. The product quality and service are highly recognized by customers. Domestically, some of the company's products have replaced imported products, saving customers a lot of costs, and have been well received by customers.
one-stop solution
professional team
high quality
Shipping and Packing
Transportation method
Express (DHL, Fedex, UPS, national special line) air transportation, sea transportation, land transportation, multiple ways to meet your needs
Port:
Tianjin, Shanghai, Qingdao or any other Chinese main port.
Lead Time:
2-15 days after payment confirmed.
Packaging Details:
1. Inside: Kraft papers, plastic bags, polyethylene foamed sheet;
2. Outside: packing: wooden box;
3. Or according to customer requirement.
FAQ
FAQ
01.Are you a factory or a trading company?
02.Can I get some samples?
03.Do you accept OEM, ODM?
04.How about the payment terms?
05.How about the quality control?
100% titanium sponge to produce titanium ingot and 3 times melting to ensure the uniformity of chemical composition.
We could provide material milling certificate and other thrid party inspection.
06.What kind of test you could make?
2.UT Testing Detector
3.Tensile Tester
4. Digital Ultrasonic Detector
5. Infrared Tester
6. HV Hardness Tester
Contact
Contact us for more information. Thank you
Nicole
Company: Baoji Jimiyun Dynamic Co., Ltd
Country:China
Add:Baoti road,Jintai,Baoji city,Shaanxi,China
Cel:+86 18391896637
Gmail:Nicole@jmyunti.com
Website:www.jm-titanium.com
Hot Tags: titanium alloy wire for eyeglasses frame, China, suppliers, manufacturers, factory, customized, wholesale, buy, price, cheap, sale, quotation, in stock, free sample, pure titanium foil, pure titanium flange nut, titanium cup, titanium sheet gr7, titanium bolt DIN85, flat titanium washer
