Compared with iron titanium metal has good physical and chemical properties, such as low density, light weight, nonmagnetic, high strength, good corrosion resistance, it has good mechanical property and welding performance, our production of titanium rods are widely used in chemical equipment, desalination, Marine parts, electroplating industry, etc., the corrosion resistance of titanium was 10 times higher than the general stainless steel, And titanium metal is a relatively low rejection metal, so titanium is widely used in human implants and medical devices.widely used in human implantation and medical devices.
1. The chemical composition of titanium and titanium alloy bars shall comply with the provisions of GB/T 3620.1, and the permissible deviation of chemical composition shall comply with the provisions of GB/T 3620.2 when the demander retests.
2. The diameter or edge length of the hot-processed bar and its allowable deviation shall comply with the company's internal control technical regulations.
3. After hot processing, the bar is polished (ground) and cold rolled, and the allowable deviation of the diameter of the cold drawn bar should conform to the internal control technical regulations of the company.
4. After hot working, the unroundness of the polished bar shall not be more than half of its dimensional tolerance.
5. The indefinite length of the processed bar is 300-6000mm, and the indefinite length of the annealed bar is 300-2000mm. The fixed or double length should be within the range of the indefinite length.
Contact us for more information. Thank you
Nicole
Company: Baoji Jimiyun Dynamic Co., Ltd
Cuntry:China
Add:Baoti road,Jintai,Baoji city,Shaanxi,China
Cel:+86 13369210920
Gmail:nicole@jmyunti.com
Website:www.jm-titanium.com
