Baoji Dynamic Trading Co., Ltd

Maintenance of titanium anodes during use

Feb 10, 2023

Regarding the maintenance of titanium anodes, it was also mentioned earlier that titanium anodes are basically maintenance-free, that is, if they are used continuously, they basically do not need to be cleaned regularly. Instead, prolonged downtime requires attention. Once the equipment is shut down for a long time, the surface of the titanium anode needs to be cleaned. Usually, it is only necessary to use pure water to clean the residual plating solution on the surface.

The key to cleaning is to clean up the sulfuric acid and copper sulfate on the surface of the titanium anode. This is because sulfuric acid in the electroplating solution will adhere to the surface of the titanium anode coating, and with evaporation, the concentration of sulfuric acid will increase significantly, resulting in the enhancement of sulfuric acid corrosion. At the same time, the copper sulfate remaining on the surface of the titanium anode will also crystallize out. Copper sulfate in the electroplating solution will penetrate into the micropores of the titanium anode surface coating and crystallize out, thus causing certain damage to the coating structure.

Another issue that needs to be reminded is that before the equipment is put into use or during major maintenance, avoid using strong alkali solution to clean the titanium anode. The strong alkali solution not only has a certain corrosive effect on the coating but also on the titanium substrate, which can easily cause the coating to peel off and lead to premature failure of the life of the titanium anode.

Contact us for more information. Thank you

Nicole
Company: Baoji Jimiyun Dynamic Co., Ltd
Cuntry:China
Add:Baoti road,Jintai,Baoji city,Shaanxi,China
Cel:+86 13369210920
Gmail:nicole@jmyunti.com
Website:www.jm-titanium.com