How about the pickling process of titanium and titanium cups?
Gmail:alisa@jmyunti.com
In the production process of titanium and titanium alloy processing materials, removing oxide scale is a crucial step, and pickling is the main means to achieve this goal. Before pickling, titanium materials usually need to be pretreated, such as molten alkali washing, mechanical descaling or sandblasting, to remove most of the dirt and thick oxide layer on the surface, creating favorable conditions for subsequent pickling.
For the slight titanium oxide film formed below 600°C, pickling is a very effective removal method. During the pickling process, titanium reacts chemically with the acid to form metal ions, thereby achieving the removal of oxide scale. However, titanium pickling is not just a simple chemical reaction, it also involves electrochemical phenomena. When pickling in a mixed acid containing hydrofluoric acid or fluoride, special attention should be paid to the reduction reaction of hydrogen ions. These hydrogen ions may be reduced to atomic hydrogen or molecular hydrogen. Among them, molecular hydrogen has a tendency to diffuse into the interior of the metal. Once it enters the interior of the metal, it may cause hydrogen embrittlement of the metal, seriously affecting the performance and service life of the titanium material. Therefore, when pickling titanium materials, the composition and proportion of the acid must be strictly controlled to prevent the occurrence of hydrogen absorption. In particular, the ratio of nitric acid to hydrofluoric acid should always be kept greater than 5. Control of this ratio is crucial to prevent hydrogen embrittlement. However, it is also necessary to note that the nitric acid content should not be too high, because too high a nitric acid content will lead to a decrease in reaction speed and production efficiency, and will also produce a large amount of smoke, which will bring difficulties to the operation.


In addition, attention should be paid to the control of process parameters such as temperature and time during the pickling process. Too high a temperature or too long a time may cause excessive corrosion of titanium and affect the surface quality. Therefore, in actual operation, it is necessary to reasonably adjust the pickling process parameters according to factors such as the material, thickness and severity of the scale of the titanium material to ensure the optimization of the pickling effect. In short, the pickling process of titanium and titanium alloy processing materials is a complex and delicate task. Only by strictly controlling the composition, proportion and process parameters of the acid solution can the pickling effect be ensured while avoiding unnecessary damage to the titanium material.
Company: Baoji Dynamic Trading Co., Ltd
Country:China
Add:Baoti road,Jintai,Baoji city,Shaanxi,China
Cel:+86 18391896637(WHATSAPP)/18391894207
Gmail:alisa@jmyunti.com
Website:www.jm-titanium.com





