Do you know how to clean the titanium tube hole?
With professional production equipment, advanced and mature technology, perfect quality system and testing system, with titanium, nickel, zirconium and other materials of the national production qualification. The following professional and technical personnel will introduce you to the specific steps of cleaning the hole in the titanium tube:
1. Oil removal: After cooling, the oil on the inside and outside surface of the pipe is removed with metal degreaser. When it comes to oil contamination, pay attention to check the position where the oil is easily deposited in the inner hole to ensure thorough cleaning.
2. Pickling: The purpose of pickling is to remove the oxide skin produced after annealing inside and outside the titanium tube. At room temperature, a certain amount of clean water is first put into the pickling tank, and then an appropriate amount of HNO3 and HF is added. The normal ratio of HNO3 and HF water is (35%-45%HNO3+5%-8%HF+ residual H2O), and the corresponding adjustment is made according to the actual situation. Pickling time is 10-15 minutes, can also depend on the pickling situation. During the pickling process, it is necessary to turn and check frequently to ensure that the pickling is uniform and complete, and to guard against over-pickling or under-pickling.
3. The inspection of the titanium tube after pickling is done visually. The oxide skin on the outer surface of the titanium tube can be removed clean and silver white.
4. Scouring: the titanium tube shall be scoured in time after the pickling inspection, so that the residual acid and pickling on the inner hole and the outer surface are removed, and the detailed character of the titanium tube is bright.
Company: Baoji Dynamic Trading Co., Ltd
Country:China
Add:Baoti road,Jintai,Baoji city,Shaanxi,China
Cel:+86 18391896637(WHATSAPP)
Gmail:alisa@jmyunti.com
Website:www.jm-titanium.com
